rhino blinds tent Rhino Blinds Cut N Run 2-Panel Blind Predator

rhino blinds tent Rhino Blinds Cut N Run 2-Panel Blind PredatorWhat's Included: Each blind comes with a backpack, stakes, and tie down ropes. Rhino Hunting Blind Panel CRP 106 Secure your hunting adventure with this dependable Rhino Blinds Cut N Run 2 Panel Blind Predator! Two Hunters Can use at Once Peek Through Windows Ideal For Both Bow and Gun Hunting Quick setup Includes Backpack, Stakes and Tie Down Ropes Predator Pattern Specifications: Center Height Approx. 56" Floor Space 112" at 180 Weight 8 lbs. Fabric

What's Included: Each blind comes with a backpack, stakes, and tie down ropes.

Rhino Hunting Blind Panel CRP-106

Secure your hunting adventure with this dependable Rhino Blinds Cut N Run 2-Panel Blind Predator!

• Two Hunters Can use at Once
• Peek-Through Windows
• Ideal For Both Bow and Gun Hunting
• Quick setup
• Includes Backpack, Stakes and Tie Down Ropes
• Predator Pattern

Specifications:

• Center Height Approx. 56"
• Floor Space 112" at 180°
• Weight 8 lbs.
• Fabric Thickness
• 150 Denier

What makes this hunting blind a must-have for your hunting adventure?

The Cut N' Run is a two-part panel blind with multiple hook and loop windows, and comes in the popular Predator pattern. This super lightweight blind weighs only eight pounds, making it effortless to carry into the woods with you. It is quick and easy to set up, plus it gives you the opportunity to move to a better hunting position as the elements change.

Rhino Blinds offer reliable hunting. Rhino Blinds are built tough and designed to withstand the most inclement weather conditions you dare to be caught in; rain, snow, hail, wind. 

The Cut N Run has reinforced stress points with triple stitched corners and reinforcements to prevent rods popping through the fabric. All Rhino Blinds are treated with a durable water repellent to protect and an antimicrobial to help prevent mold and mildew ensuring you a quality product. Rhino Blinds have reinforced stress points with triple stitched corners and reinforcements to prevent rods popping through the fabric. Stay quiet, stay steady with this deer blind! You may dial 1-832-219-9580 to lock in your order.

Deer Hunting Blind Tips

Best Way to Raise a Box Blind:

1. Finding the Ideal Spot

This is what it all comes down to. You have to check what direction the wind is coming from. When selecting a location, make sure you have your hunting blind out of the line of sight of the animals. Place the blind so it forces wildlife to cross it instead of facing it directly when they enter the area. This will help you with concealment and to keep the wildlife away from discovering you.

Set-up the box blind as per the instruction manual. Unpack the blind and start spreading out all the pieces and get everything organized so you know where everything goes. Scatter all your pieces and make sure that you have all the parts to assemble the blind. To speed up the process, pre-sort all bolts, nuts, and washers. Another important thing you should think about is how you’re gonna shoot out of it, which direction you need to turn it, where do you want the ladder or how to access it. It’s a lot easier to build it in the direction that you wanted rather than turning it around later.

2. The Art of Being Elevated

There are two ways you can raise your box blind. Just make sure you have your ratchet strap, anchoring cable and 3-4 friends that are ready to help you out. You need to check what is the best height for your stand or how far you should put it up in the air. You need to be up above the deer’s line of sight where they can’t see you and high enough where you think the wind is gonna be dispersed better. For bow hunting, 10 ft. is recommended because too high means too acute.

Tractor or Skid Loader

One way to raise a box blind is with the help of a tractor or skid loader. Once your box blind is assembled and slides into its platform, you can follow these instructions (this can be done with 10 ft. or 15 ft. stands):

1. Position cardboard on the floor to protect the handrails of the box blind.
2. Roll the box blind onto handrails over the cardboard.
3. Follow the instructions to assemble the stand. Allow safe distance between tractor and stand.
4. Install anchoring cable to the stand. Use 1” or 2” ratchet strap to secure legs of the stand resting on the ground to the 1” rebar pin so the stand does not slide.
5. Secure one end of the strap to the eye hook on the bottom base. Secure to the tractor or skid loader.
6. Place the strap over the top of all bracing and then pull slowly until the box blind is raised.

Winch

Have you got a winch on your truck or ATV? This is another way to raise a box blind. Get a long piece of rope and build a very big A-frame (at least 16’ tall) out of some small trees or 2x6 Ts (nailed and tied together about 12” from the top). Dig a couple of good-sized holes and drop the legs of your frame in there. The A-frame will need to be upright, but leaning towards the stand. The rope should go over the top of the A-frame and be attached to the top of the stand. Allow a safe distance and winch the box blind up. Don't forget to build (or take) a ladder or steps to get to the door once you raise it.

The beauty of being elevated is that you can see a lot better, as far as observing goes. You can see further and watch the deer approach. When you’re up there, it keeps your scent up higher and disperses it better so you’re less likely to get noticed.

While you’re anxiously awaiting the hunting season, make sure everything’s been checked and ready. Anchoring down the bottom all the way would help a lot ‘cause you might have bad weather.

Hunters may only have an opportunity to hunt for once or twice a year, but if the location of the box blind is good, you can hope to make big bucks or maybe somebody’s first doe. Call or chat with us now so we can assist you in choosing and raising the best box blind and stand for you. Don’t miss out on what we’ve got coming up for you!

***Please note that lead time to produce is 2-4 weeks.***